|
|
| 首頁 > 産品中心 |
|
AUDIO TECHNICA
AT2035
 |
| Cardioid Condenser Microphone | | - Large diaphragm for smooth, natural sound and low noise
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom shock mount provides superior isolation
- Switchable 80 Hz high-pass filter and 10 dB pad
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
AT2035 Specifications |
|---|
Element | Fixed-charge back plate, permanently polarized condenser | Polar Pattern | Cardioid | Frequency Response | 20-20,000 Hz | Low Frequency Roll-Off | 80 Hz, 12 dB/octave | Open Circuit Sensitivity | -33 dB (22.4 mV) re 1V at 1 Pa | Impedance | 120 ohms | Maximum Input Sound Level | 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) | Noise | 12 dB SPL | Dynamic Range (Typical) | 136 dB, 1 kHz at Max SPL | Signal-To-Noise Ratio | 82 dB, 1 kHz at 1 Pa | Phantom Power Requirements | 11-52V DC, 3.8 mA typical | Switch | Flat, roll-off; 10 dB pad (nominal) | Weight | 403 g | Dimensions | 52mm x 170mm (Maximum Body Diameter x Long) | Output Connector | Integral 3-pin XLRM-type | Accessories Furnished | AT8458 shock mount for ⅝”-27 threaded stands;
⅝”-27 to ⅜”-16 threaded adapter;
soft protective pouch |
|
|
|
|
|
