|
首頁 > 産品中心 |
AUDIO TECHNICA
AT2050
|
Multi-pattern Condenser Microphone | | - Three switchable polar patterns: omni, cardioid, figure-of-eight
- Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
- Switchable 80 Hz high-pass filter and 10 dB pad
- State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
- Dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use
|
AT2050 Specifications |
---|
Element | Externally polarized (DC Bias) condenser | Polar Pattern | Cardioid, Omnidirectional, Figure-of-8 | Frequency Response | 20-20,000 Hz | Low Frequency Roll-Off | 80 Hz, 12 dB/octave | Open Circuit Sensitivity | -42 dB (7.9 mV) re 1V at 1 Pa | Impedance | 120 ohms | Maximum Input Sound Level | 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) | Noise | 17 dB SPL | Dynamic Range (Typical) | 132 dB, 1 kHz at Max SPL | Signal-To-Noise Ratio | 77 dB, 1 kHz at 1 Pa | Phantom Power Requirements | 11-52V DC, 3.8 mA typical | Switch | Pattern selection; Flat, roll-off; 10 dB pad (nominal) | Weight | 412 g | Dimensions | 52mm x 170mm (Maximum Body Diameter x Long) | Output Connector | Integral 3-pin XLRM-type | Accessories Furnished | AT8458 shock mount for ⅝”-27 threaded stands; ⅝”-27 to ⅜”-16 threaded adapter; soft protective pouch |
|
|
|
|